Product Details

Product parameters：

Voltage: 100-220V 50/60HZ

Adjusting gear: Five gears to adjust energy

2 probes detection frequency: 3MHZ

Power: ≤72W

Energy output: 1-15J/CM^

Probe diameter: Level 3 23MM, Level 6 54MM

Machine size: 22*22*8.5CM

Machine weight: 1.6kg

Color box size: 33.5*25.7*13CM

Package weight: 2kg

Carton details: 55*35*60CM/22kg/10 units/box

Packaging list: RF instrument*1, three-pole head*1, six-pole head*1, instruction manual*1, power cord*1

Methods of Operation 

1. Place this device on a flat floor for easy airflow. 

2. Hand piece cable should be fully plugged into the hand piece. 

3. Insert power cable into adapter terminal. 

4. When the indicator is on, it means the machine is on standby. When the indicator is flashing, it means the machine is in operation. 

5. Apply 2-3 mm thickness of gels on area to be treated by around 2 times pumps. 

6. After setting energy level. start operate referring to above diagram. When gel is dried during operate it. 

7. Move hand piece slowly over the area as shown in above diagram but don’t linger on a single area for too long. 

8. After finishing treatment on gel applied area, proceed to treat other areas as specified in the diagrams. 

9. Remove gels on treated area after treatment and also gels remnant on the hand piece and electrode with cloth or napkin. 

10. Applying ampoule or cream on skin after operation could enhance skin treatment progress. It is recommended to apply UV block lotion on skin after operation if you exposeto the sun.

Functions:

1. Lifting face & body

2. Warm skin rejuvenation

3. Wrinkle reduction